Pressure Transmitter – 1/8” NPT – 2000 PSI – 4 to 20mA – XMT1-2K-2MP

The Hyvair XMT1-2K-2MP is an X Series pressure transmitter. It reads hydraulic pressure across a 2,000 psi range and turns it into a 4 to 20 mA current signal that a controller, PLC or panel display can read. Part number XMT1-2K-2MP identifies this 2,000 psi, 1/8 in thread version.

The process connection is a 1/8-27 NPT thread. NPT is a tapered pipe thread, so the joint seals on the taper as it is tightened into a matching female port. Check that the port on your manifold, line or test block is cut for 1/8-27 NPT before ordering.

The transmitter runs on an 8 to 30 V supply. As pressure rises from zero toward the full 2,000 psi, the output current climbs from 4 mA toward 20 mA, so the receiving input can scale the signal straight to pressure. Because the signal is a current, the reading does not depend on the voltage drop along the wire run.

Response time is under 1 ms. The output follows rapid changes in system pressure, which matters when the signal feeds a control loop or a data logger instead of a gauge someone reads by eye.

Order the XMT1-2K-2MP when a circuit needs a 4 to 20 mA pressure signal up to 2,000 psi from a 1/8-27 NPT port and the control system can supply 8 to 30 V.

Related categories: Pressure Switches & Transmitters · Transmitters

Brand: Hyvair