Images used may not represent the actual product.
$59.62
The Zinga SS20000 hydraulic suction strainer, part number SS20000, mounts inside the reservoir on the pump suction line to catch debris before it reaches the pump. It has a 2 in NPTF outlet and is rated for 53 gpm at 5 ft/sec. A suction strainer is the coarse first stage of protection, stopping larger particles at the pump inlet.
A 100 mesh wire cloth element sits on a cast aluminum cover. The end caps use reverse taper wall construction, which locks mechanically with the epoxy adhesive to prevent bond failure, a benefit in rough-terrain vehicle applications.
Pressure drop is under 1/2 psi at rated flow with 150 SUS oil. That matters on the suction side, where added restriction can starve the pump. The wrench flat is 3.0 in, overall length is 7.2 in and outside diameter is 4.2 in. Operating temperature is up to 250°F.
The SS Series covers outlet ports from 1 to 3 in NPTF. This model has no bypass valve; 3 psi and 5 psi bypass valves are series options. A magnetic version, the SS20000M1A, is also available.
Related categories: Filtration & Fluid Conditioning · Zinga Filtration · Zinga Strainers · Zinga SS Series
Brand: Zinga Filtration
