Images used may not represent the actual product.
$176.50
The Zinga G0803HN is a G Series pressure filter element with Z-Glass media. It is the replacement element for P3000 Series pressure filters. A pressure filter sits on the pressure line after the pump and removes particles before oil reaches valves, actuators and other components.
Filtration efficiency is rated by beta ratio. This element is listed at β(c) = 1000 for particles smaller than 4 micron. A beta ratio of 1000 means that for every 1,000 particles at that size entering the element, about one passes through, a capture efficiency of 99.9 percent.
The element measures 1.76 in in diameter and 8.15 in in overall height. Check these dimensions against the element you are replacing.
Its listed operating pressure is 3,000 psi maximum. Temperature limits depend on seal material: nitrile seals are rated from -45°F to +225°F, and fluorocarbon seals from -20°F to +275°F. Confirm which seal material your system fluid and operating temperature call for.
Replace the element on the schedule your filter housing or maintenance plan specifies, or when a differential pressure indicator shows it is loaded. Keeping a spare G0803HN on hand cuts downtime when a change is due.
