Images used may not represent the actual product.
$74.63
The Zinga SS15000M1A is an SS Series hydraulic suction strainer with magnetic filtration, 100 mesh standard media and a 32 gpm flow rating. A suction strainer protects the pump by stopping large debris on the inlet side before it can be drawn in.
The outlet port is 1-1/2 in NPTF. The strainer measures 3.2 in outside diameter and 9.3 in long, so check that length and diameter against the space available inside your reservoir or at the mounting point.
The 100 mesh screen has 100 openings per linear inch. That is a coarse grade suited to suction service, where low restriction matters because a restricted inlet can starve the pump. The magnetic filtration adds a second way to catch contaminant: magnets hold ferrous particles, such as fine steel wear debris, that can be small enough to pass through a screen.
Operating temperature is rated up to 250°F.
Match the 32 gpm rating to your pump’s flow, and inspect and clean the strainer at regular intervals so collected debris does not restrict the inlet. Clean the magnetic assembly at the same time.
