Images used may not represent the actual product.
$16.82
Zinga SME25 SME Series tank mount filter element with 25 micron cellulose depth media for general contamination control. It measures 2.75 in outside diameter and 5.18 in long and fits SMF housings.
I took the specs from catalog page E18 and checked the dimensions against the drawing. I also mentioned SMF housing compatibility, since the catalog lists it.
The Zinga SME25 is an SME Series tank mount filter element with 25 micron cellulose media. It fits Zinga SMF tank mount filter housings and captures particles as fluid passes through it into the reservoir side of the circuit.
The element is 2.75 in outside diameter and 5.18 in long. Cellulose is a depth media, so it traps particles throughout the thickness of the material, not only on its surface. Check both dimensions against your housing before you order a replacement.
The nominal rating is ß19µ(c) = 2 and the absolute rating is ß36µ(c) = 75. A beta ratio of 2 at a particle size means about half of the particles at that size are captured. A ratio of 75 means about 98.7 percent are captured.
A 25 micron rating is the coarsest grade in the SME Series. Its media is more open than the 3 and 10 micron grades, so it has the lowest pressure drop of the three and loads more slowly. It suits circuits where general contamination control is enough.
Replace the element when the pressure drop across it rises or at your scheduled service interval. Keeping a spare on hand shortens downtime when a change is due.
