Cartridge Valve Solenoid Coil – 08 Series – Cylindrical – 12VDC – Din Coil – LC2-08-C-1H

The LC2-08-C-1H is a solenoid coil for 08 series cartridge valves. It is part of the L Series, type LC2, and is built in a cylindrical style. The coil is rated for 12 VDC and uses a DIN coil electrical connection.

A solenoid coil is the electrical half of a solenoid-operated cartridge valve. When the coil is energized, it creates a magnetic field that shifts the valve and changes the flow path through the cartridge. When power is removed, the valve returns to its de-energized position. The coil fits over the valve tube, so it can usually be changed without pulling the cartridge from its cavity.

The coil body is 34.3 mm (1.35 in) in diameter and 37 mm (1.46 in) long. That compact size suits valve manifolds where cartridges sit close together. The 08 in the part number identifies the cartridge size this coil is matched to. Use it with 08 series cartridge valves that call for an LC2 type coil. Before ordering, compare the part number on the existing coil or in the valve documentation, because coil type, size, style and voltage all have to match the valve.

Confirm that your control circuit delivers 12 VDC at the coil. A coil supplied at the wrong voltage may not shift the valve as intended. The DIN coil connection takes a DIN style plug connector, which keeps wiring changes simple when the coil is replaced in the field.