D05 Double Solenoid Operated Directional Valve – DIN Coil Type, 3 Position Spring Centered – All Ports Open – 24VDC – D05SD-2H-24D-35

The Hyvair D05SD-2H-24D-35 is a D05 Series 35 double solenoid operated directional valve with 24 VDC DIN coils. It fits the NFPA T3.5.1.MR1-D05 / ISO 4401-05 mounting pattern and is rated to 5000 psi and 42.3 gpm. Two solenoids shift the spool in either direction, and springs center it, so the valve has 3 positions.

Spool code 2H opens all ports in center. P, A, B and T are connected, which lets pump flow pass to tank and lets the actuator float while the coils are off.

Each coil uses a 3-pin DIN 43650 Form A / ISO 4400 connector, and the connectors are supplied. Indicator lights are optional on the connector. The coils operate within 21.6 to 26.4 V and draw 36 W holding power. DC coils are not polarity sensitive. The oil-immersed solenoids run quietly, the plug-in coils change out without disturbing the wiring, and push pin manual overrides allow hand shifting.

Twin tank channels reduce pressure drop, and the tank port is rated to 2320 psi. Hyvair designs the valve for 30 million spool shifts. Recommended filtration is 25 micron or finer. The valve is rated for fluid temperature from 41 to 140 °F and viscosity from 80 to 1400 SUS. The included bolt kit has four 1/4-20 SHCS x 1-1/2 in.

Related categories: Valves · Solenoid Valves · D05 Series · Din Coil · Double Solenoid · 24 DC

Brand: Hyvair