D05 Double Solenoid Operated Directional Valve – DIN Coil Type, 3 Position Spring Centered – All Ports Open – 12VDC – D05SD-2H-12D-35

Part number D05SD-2H-12D-35 is a Hyvair D05 Series 35 double solenoid operated directional valve with 12 VDC DIN coils. It mounts on the NFPA T3.5.1.MR1-D05 / ISO 4401-05 pattern and is rated to 5000 psi and 42.3 gpm. Two solenoids shift the spool in either direction, and springs return it to center, so the valve has 3 positions.

With spool code 2H, all ports are open in center. P, A, B and T connect, so pump flow passes to tank and the actuator floats while both coils are off.

The coils use a 3-pin DIN 43650 Form A / ISO 4400 connector, supplied with the valve, and indicator lights are optional on the connector. The permissible voltage range is 10.8 to 13.2 V and holding power is 31 W. DC coils are not polarity sensitive. The oil-immersed solenoids run quietly. Plug-in coils change out without disturbing the wiring, and push pin manual overrides allow hand shifting.

Twin tank channels reduce pressure drop. The tank port is rated to 2320 psi, and Hyvair designs the valve for 30 million spool shifts. Recommended operating conditions are filtration of 25 micron or finer, fluid temperature from 41 to 140 °F and viscosity from 80 to 1400 SUS. A bolt kit with four 1/4-20 SHCS x 1-1/2 in is included.

Related categories: Valves · Solenoid Valves · D05 Series · Din Coil · Double Solenoid · 12 DC

Brand: Hyvair