Cartridge Valve Solenoid Coil – 10 Series – Square – 24VDC – Din Coil – LC3-10-S-2H

The LC3-10-S-2H is a square solenoid coil for 10 series cartridge valves. It is part of the L Series, type LC3, and is rated for 24 VDC with a DIN coil connection.

A solenoid coil supplies the force that operates a solenoid cartridge valve. When current flows, the coil builds a magnetic field that shifts the valve and changes where oil goes. When current stops, the valve moves back to its de-energized position. The coil fits over the valve tube, so on most installations it can be swapped without taking the cartridge out of its cavity.

Two details in the part number matter when ordering. The 10 identifies the cartridge size, and the S identifies the square style. Use this coil with 10 series cartridge valves that call for an LC3 type square coil, and compare it with the part number on the coil being replaced. Type, size, style and voltage all need to match the valve.

The coil is rated for 24 VDC. Check that your control circuit supplies 24 VDC at the coil, since a coil run on a different voltage may not shift the valve as expected. Wiring is made through a DIN coil connection that takes a DIN style plug connector.

Related categories: Valves · Cartridge Valves · Solenoid Coil Cartridge Valves