Images used may not represent the actual product.
$37.94
The LCV-08-P-4 is a direct-acting, poppet-type cartridge check valve for a C08-2 cavity. A check valve lets fluid flow in one direction and blocks it in the other. In this valve, a spring-biased poppet allows free flow from port 1 to port 2 and seats to block reverse flow.
Cracking pressure is 4 psi, the pressure at which the poppet starts to lift off its seat. A low cracking pressure means little force is needed to open the valve, which keeps the pressure lost across it small.
The valve is part of the L Series. It is rated for an operating pressure of 3,625 psi, a flow of 5 gpm and a temperature range of -30 to 250°F.
As a cartridge valve, the LCV-08-P-4 installs in a standard 08-2 cavity in a manifold or line body. That keeps the installation compact and makes the valve simple to replace during service. The poppet seal gives fast response and tight shutoff. Common uses for a check valve of this type are backflow prevention, pump and actuator protection, and load holding in mobile and industrial hydraulic systems.
Related categories: Valves · Cartridge Valves · Check Valves
