Images used may not represent the actual product.
$95.62
The LPC-10-50 is a pilot-to-open cartridge check valve with a poppet design and a 50 psi cracking pressure. It is an L Series cartridge for a C10-3 cavity, rated at 5 gpm and 3,625 psi.
A standard check valve lets oil flow in one direction and blocks it in the other. A pilot-to-open check adds a third port. Pressure applied at that pilot port lifts the poppet off its seat and opens the blocked direction on command. This is how a circuit can hold a cylinder in place and then release it when the control valve sends a pilot signal.
The poppet seals against a seat, which gives low leakage in the blocked direction. Free flow begins once pressure reaches the 50 psi cracking setting.
Ratings are 5 gpm flow and 3,625 psi operating pressure. The operating temperature range is -30°F to +250°F.
When specifying, confirm that your manifold or body is machined for a C10-3 cavity and that flow through the valve stays within 5 gpm. Check that your pilot circuit can supply enough pressure to open the valve against the load it holds.
Related categories: Valves · Cartridge Valves · Pilot Check Valves
